236cc - 72mm x 58mm Small GX Forged Wiseco Short Block Kit

Everything you need to assemble a 236cc small block GX200 clone Short Block. You will need to clearance the block and your cam, but this crank, rod, and piston will all drop right into the TC225 block with the piston 0.009" below the deck at TDC. Use a head gasket with a minimum of 0.020" thickness. Clearancing will be required for assembly.

There is a 3 - 4 day lead time on shipping this item.

This kit includes the following: 

72mm bore x 136.8mm deck height TC225 block

Cast aluminum 7 bolt side cover or optional ARC 6067 billet side cover or HD cast oil pump side cover with filter from the Shredder engine!

Forged 58mm crankshaft with GX200/Clone (1.181"/30mm) rod journal

ARC 6234 billet 3.595" connecting rod

72mm bore x 16.256mm compression height x .490" pin forged aluminum Wiseco THREE RING flat top piston kit with rings, pin, and clips

2x Crankshaft bearings

2x Crankshaft seals

2x Magnetic drain plugs with safety wire hole

1x pair of side cover dowels

1x pair of head dowel pins

1x set of grade 10.9 side cover bolts

1x set of grade 10.9 head bolts

Gasket kit

72mm x 0.045" thick head gasket

Optional:

ARC billet flywheel of your choice: 6619, 6669, or 6689. Adds $120.00

ARC 6057 dual ball bearing billet side cover kit: Also removes one of the bearings, one of the seals, side cover dowels, and the side cover bolt set that you don't need from the final price. Adds $108.61