ARC Racing Billet Sidecover - 6058 - Predator 212 Non-Hemi / Rato R210

Fits the Predator 212 Non-Hemi / Rato R210/R210V/R225/R225V / Northstar C225 engines

Features side by side dual ball bearings that support the crank and gives it another fulcrum point to help eliminate any crankshaft flexing. It has an integral o-ring along the perimeter in its machined groove that guarantees a good seal. 4 solid pin receptacles mate with solid dowels to increase mating shear strength. Bronze bushing(with ARC's advanced oil system) support for camshaft main increases strength and minimizes potential for wear. It has 2 venting holes at the top with 1/8" NPT Plugs. It also has 2 oil fill ports with billet ARC aluminum hand tighten plugs. Another useful feature is the threaded holes over the side dowel pins so that small bolts (included) can be used to push the side cover away from the block for easy removal.  Chain guard mounting hole thread size M8X1.25mm.

Includes: Bearings, Seal, Gasket, O-Ring, Plugs and caps and installation hardware.

*Not compatible with electric start engines*

***Bolt torque 185-200 inch/lbs***

***use 14oz of oil in most applications***

 * Important *  Due to variations in blocks, you may find that the side cover is not quite lining up with all four dowel pins. Try removing the bottom dowel pin if you encounter difficulty. Contact ARC's tech department if you have any problems.

**Will Not work with Stud Kit. Must use the bolts in the kit.**