Big Block Clones LLC
Chromoly Pushrods for GX200 and Clone - 3/16" - Non-Hemi - Pair
Chromoly Pushrods for GX200 and Clone - 3/16" - Non-Hemi - Pair
Couldn't load pickup availability
Severe duty 3/16" chromoly steel pushrods for all GX200 and clones with non-hemi head including Shredder heads.
Must use hardened steel guide plate OR shaft mount rockers.
*Pushrod length depends on the block's deck height, cylinder head deck thickness, cam base circle diameter, lifter length, valve length, and rocker arm type*
Most performance cams have a .850" base circle. These pushrod length recommendations are based on you running a Shredder head, but clone and Predator heads setup at a similar height. The main difference in length needed by most of the small industrial engine pushrods is due to lifter length and block deck height.
NOTE: DIFFERENT DECK HEIGHT BLOCKS COME WITH DIFFERENT LENGTH LIFTERS SO BE SURE TO USE THE CORRECT LIFTERS FOR YOUR APPLICATION OR THE PUSHROD LENGTH WILL BE INCORRECT.
| OE Lifter Dimensions | Stock Length | Head Diameter | Head Thickness | Stem Diameter |
| Loncin G210FA (Predator 212 hemi) | 34.80mm | 23.50mm | 1.85mm | 7.73mm |
| Rato R210 (Predator 212 non-hemi) | 34.80mm | 23.50mm | 1.85mm | 7.73mm |
| Ducar DH225 (Predator 224 non-hemi) and TC225 blocks | 36.60mm | 23.50mm | 1.85mm | 7.80mm |
| Lifan HP212E (Shredder engine) | 34.80mm | 23.50mm | 2.25mm | 7.95mm |
Sold in pairs.
Share
