GX200, Clone, Predator, and Other Small GX Wiseco Forged 76mm Two Ring Piston Kit - Optional Compression Heights

Forged aluminum Wiseco two ring piston for 2.992" bore with a 0.640" compression height and .490 wrist pin. Works with ARC .490 wrist pin rods and either clone sized 1.180" rod journals or 1" Briggs "stroker" rods.

Bore: 76mm (2.992") 

Compression height: 0.640" with optional shorter heights available

Wrist pin diameter: 0.490"

**Kit includes wrist pin, circlips, and ring set**

In a 135.5mm deck height Tillotson Racing block with a 63.5mm stroke crank, the 3.525" length stroker connecting rod, and the .550" compression height optional size for this piston it will sit 0.010" below the deck at TDC and create a 288cc short block. Add a cylinder head with a 16cc chamber with a 0.045" gasket under it and you'll have 14:1 compression ratio. As an example of what this combo could do, you will need a head that flows an approximate average of 140cfm to make a peak power of around 36hp at 8,000rpms with this large of an engine. 

Click here for 63.5mm / 2.500" stroke cranks 

Click here for ARC billet 3.525" x 1" stroker connecting rods